Through-the-gills vs clip-on spearfishing stringers

A spearfishing stringer keeps your catch attached to the speargun shaft so that a fish cannot swim away while you line up another shot. Choosing between a through-the-gills stringer and a clip-on stringer affects catch security, line handling and the equipment you carry. Both styles are used in Australia, but rules for securing fish can change between states, marine parks and species.

A good comparison considers more than speed. Fish size, current, visibility, water temperature and your retrieval method all matter. Your mask, fins, wetsuit and booties set the operating conditions: full stinger protection in tropical Queensland feels very different from a 5 mm wetsuit on a temperate NSW reef. The stringer should support that setup, not fight it.

How the two stringer styles work

Through-the-gills stringers use a slim cord or insert that passes through a fish’s gill opening and connects it to the tether. A clip-on stringer uses spring clips, snap hooks or similar fittings attached to the fish or spear shaft. The first creates a direct connection with little loose hardware; the second provides quick-release points and can hold multiple fish where regulations allow it.

Feature Through-the-gills Clip-on
Fish connection Cord passes through a gill opening Clip fastens to the fish or shaft
Load Carried through the cord and gill Carried by the clip and attachment point
Typical capacity Usually one fish Can accommodate several fish where permitted
Setup Requires careful threading Quick with a pre-rigged clip
Tangle risk Less loose hardware around the fish More leaders and fittings can snag
Fish impact Can injure gill tissue Avoids gilling the fish, but clips may slip
Maintenance Rinse and inspect the cord Rinse and inspect clips, springs and joints

Neither style is automatically better. A through-the-gills connection can be compact and quiet for one food fish, while clips can be more forgiving when handling smaller catches. However, some Australian rules restrict particular stringer arrangements, species or areas, and a method that is lawful in one state may not be lawful elsewhere. Check current state guidance and local club advice before choosing how to secure your catch.

Where through-the-gills stringers excel

Through-the-gills stringers suit spearfishers who normally return with one fish and want minimal movement around the catch. With the cord correctly routed, no clip bodies swing beside the shaft. That can reduce snagging and keep the profile cleaner while swimming over coral or working a reef edge in strong tidal flow.

They also keep the load in a simple, visible line. Instead of several clips and leaders bouncing around the spear, the connection runs in one direction. This matters when you are concentrating on a fish below you, managing a deep drop or watching the line in poor visibility.

The trade-off is the fish. Passing a cord through the gill can cause injury, and a poorly fitted gill stringer can slip or tear as you lift the catch. This style is unsuitable for fish that must be released and should never be used simply because it is quicker. Correct sizing, smooth hardware and compliance with take limits are essential.

Where clip-on stringers excel

Clip-on stringers are convenient when speed and flexibility matter. A pre-rigged clip can be attached to the spear shaft or a short leader with less fiddling than threading a gill cord. For a diver moving between patches of fish, that quick setup can reduce the time spent managing the catch.

A multi-clip stringer also gives each fish a separate place on the tether. That organisation can be useful when several permitted fish are being brought home, especially if each clip can be checked for a secure connection before you move. Single-clip versions provide a simpler option for people who only take one fish.

The downside is hardware. Clips can swing, catch on line or create several loose loops that need watching in current. A badly seated clip may release, and a corroded spring can fail at the worst moment. Inspect each fitting, avoid cheap play hardware and never combine a stringer setup with a snag-prone line arrangement.

Matching equipment to Australian conditions

Boat-based trips from Sydney and Newcastle are common for NSW reef divers, and cooler water often makes a 3 mm or 5 mm wetsuit, gloves and reef boots more useful than minimal tropical gear. Visibility can deteriorate quickly around the coast, so keeping the tether short and the line clear of your fins is valuable. Always unload the spear away from swimmers and other divers.

Cairns and the Great Barrier Reef bring different priorities. Tropical sun, stronger current and seasonal stinging organisms call for appropriate sun protection, reef-safe practices and, in many areas, a full stinger suit. Farther south, Tasmania’s colder water favours thicker neoprene, a hood and careful warming between dives. Local forecasts and club advice matter more than a generic gear checklist.

West Australian beaches have their own routine, too. At Cottesloe Beach, bodyboarders comparing coiled versus straight leashes balance compact storage against snag resistance, although a bodyboard leash has a different safety role. Australian spearfishers often talk about “going shooting”, and the rules can be strict: permits, protected zones and species limits differ across NSW, Queensland, Western Australia and Tasmania.

Building a dependable setup

Choose the connection for the catch you intend to keep, then match the rest of the rig to the conditions. A compact gill cord suits a single permitted fish, while a rated clip can give a quicker release point or additional capacity. Consider whether you will dive from a boat, shore or kayak, and whether a reel or throw bag will help you recover the line.

Practice the full arrangement before you rely on it underwater. Rehearse attaching the tether, identify any line that could snag and check that the fish stays clear of the spear’s rear line. A quick land-based test is particularly worthwhile for beginners, because a loose leader or misloaded clip becomes obvious before you enter a current.

  • Check the current rules for your location, including protected areas, species limits and restrictions on the attachment method.
  • Use a correctly sized gill cord or clips rated for the expected load, rather than general-purpose snap hooks.
  • Keep the tether controlled with a throw bag or reel, and prevent a loose loop from reaching other divers.
  • Inspect the cord, clips, swivels and attachment points, replacing damaged or corroded parts before departure.
  • Fit retrieval equipment for the dive, and keep the speargun pointed away from swimmers and divers when unloading.
  • Test the setup on land, then complete a controlled water check before hunting in current or low visibility.

If you also want to film, compare GoPro housing options for the dive depth and fit, and keep the camera rig separate from the tether so its housing cannot catch the line. Good positioning matters more than adding another piece of equipment to a busy rig.

Prepare your next spearfishing trip

A dependable stringer is a small part of a safe, well-organised spearfishing kit. Fins that fit your foot, a mask with a clear field of view, suitable thermal protection and a reliable line system all influence how you handle a catch. Clean and dry gear after each excursion, especially saltwater-washed clips, and store it away from direct sun.

When you are ready to build your setup, Procean Online can help you compare wetsuits, freediving fins, masks and spearfishing accessories. For a diving club, order or group trip, send the equipment list and member numbers through the contact page for a personalised quote, then head out equipped for the conditions and the legal catch you intend to bring home.